14 | OV1022
User Guide: OV1022
PROGRAMMABLE HANDSWITCH OPERATION
(continued)
CHANGE THE HEIGHT UNIT
(inches or centimeters)
The handswitch can display the table height in either centimeters or inches. With the help of the
S5-menus, the unit of measure can be changed.
To change the unit of measure, follow these steps:
1. Press and hold the 1, 2, and UP buttons until the display shows “S 5”.
2. Confirm by pressing the “S” button. Now the display will have changed.
To exit the menu without making a selection, wait until the height display appears again.
CHANGE THE HEIGHT DISPLAY
If the displayed value does not match the actual height of the table top, the display can be corrected
as follows:
1. Press and release the “S” button.
2. Press and hold the DOWN button until the display starts to flash.
3. Change the height shown on the handswitch by pressing the UP or DOWN button to the desired height.
Confirm by pressing the “S” button.
To exit the menu without making a selection, wait until the height display appears again.
SAVE MEMORY POSITION
1. Move the table up or down to the desired height.
2. Press the “S” button (in the display “S -” is shown.)
3. Select a position by pressing one of the four number buttons, 1-4, (the display will show the setting
as “S1”).
4. The saved position is confirmed by a double click sound from the control box. The display shows the
current table height. Repeat steps to save a maximum of four different positions.
RECALL MEMORY POSITION
Press and hold the desired memory button (1, 2, 3 or 4) the table moves from the current position into
the saved position. The button must be pressed until the position is reached. If the button is released,
the table will stop short of the desired height.
OPERATION INFORMATION
