10 | OV1022
User Guide: OV1022
ASSEMBLY INSTRUCTIONS
ASSEMBLE THE LEG TO THE COLUMN
Assemble using the M8 hex nuts (2 per
leg). The maximum tightening torque
for these is 24Nm (17.7 ft-lbs).
3
PRE-INSTALL THE HEX NUTS
Partially install the M8 hex nuts
onto column studs (about halfway).
INSTALL LEG OVER THE HEX NUTS
Using keyhole openings, install the leg over the
hex nuts and slide studs into the small slots.
Tighten the hex nuts the rest of the way.
The maximun tightening torque for these
is 48Nm. (35 ft-lbs).
a
b
Column Studs
M8 Hex Nut
Leg Mounting Plate
