![background image](http://html.mh-extra.com/html/omron/zx2-ld100/zx2-ld100_user-manual_1633410083.webp)
Smart Tuning
83
ZX2 User’s Manual
INTRODUCTION
BASIC
SETUP
PREPARATION
FOR
MEASUREMENT
TROUBLE-
SHOOTING
INDEX
CONTENTS
SETTING
TRANSITION
CHARTS
FLOW OF
OPERATION
MAIN
APPLICATIONS
& SETTING
METHODS
DETAILED
SETTINGS
SPECIFI-
CATIONS
Height
Double
Sheet
Detection
Positioning
Eccentricity
and Surface
Deflection
Steps
and
Warpage
Thickness
(3) Tuning of workpieces having different surface states: Active smart tuning
(execution of tuning while workpieces are moving)
4
Return to RUN mode
Button
Operation
Display
Description of Operation
Explanation of
Selection Menu
Press the
button for five
seconds with the workpiece set
in place. When
/
is displayed, release
your finger from the button to
start execution of smart tuning.
Because the execution of
smart tuning continues, move
the workpiece.
* /
and
/
are
displayed for one to five
seconds after the button is
pressed, and then
/
is displayed.
At the end of the desired tuning
period, press the
button
again for 5 to end tuning.
The optimum setting
conditions will be set.
If "
" flashes on the
sub-display for three
seconds, it indicates that
tuning was not possible.
Change the response time
setting to a larger value, and
try again.
Button
Operation
Display
Description of Operation
Explanation of
Selection Menu
Hold down the
button for
three seconds to switch to the
RUN mode.
Hold down for
5 seconds
Pressing down
Pressed down
Flashing
Hold down for
5 seconds
Optional
Hold down for
3 seconds
Out