Omron ZW-C1*T, User Manual, Page: 72 / 322

Setting Sensing
70
ZW User's Manual
4-1 Setting Sensing
Selecting the Area Mode
Area modes can be used selectively according to the target to measure.

Explorer pane : [Bank] | [(Bank Data Name)] (double click)

Edit pane : [Sensing setting] icon ( )
Item Setting item Setting value Description
Operating mode Area Mode 1 area mode Usually, select this setting.
2 area mode We recommend measuring in the 2 area mode when the measurement object
is a transparent object and the reflection characteristics of the target to
measure are different.
The sensing setting suitable for each the measurement surface can be used.
1
Select the area mode at [Operating mode] -
[Area mode].
• When the 2 area mode is selected,
[Measurement area 2] is added to the setting
items for sensing setting.
• In the 2 area mode, the exposure time control
mode and measurement area must each be set
for [Measurement area 1] and [Measurement
area 2].
Setting Exposure Time Control Mode
p.75
Setting the Measurement Area p.76
• The measuring cycle for the 2-area
measurement mode is twice as long as the one
for Area 1 or 2, which is longer than the other.
Important