![background image](http://html.mh-extra.com/html/omron/zw-c1-t/zw-c1-t_user-manual_1633390078.webp)
Setting Sensing
76
ZW User's Manual
Setting the Measurement Area
The measurement area can be limited, setting upper line and lower line of selected area.
The measurement object can be measured stabile, cutting out the area that the object does not exist.
When the measurement object is set to "Glass," measurement may not be performed correctly as
measurement will be influenced by reflection from the rear surface. If this happens, set the measurement area
of each measurement surface so that they can be correctly measured.
Explorer pane
: [Bank] | [(Bank Data Name)] (double click)
Edit pane
: [Sensing setting] icon (
)
Sensing settings window : [Measurement area 1] or [Measurement area 2]
• Ensure that the setting values for the measurement area satisfy the following relationship: [Start] < [End].
• To set the measurement area using any value by the above method at [Measurement area 2], set [Area follow] at
[Area follow settings] to [OFF].
Item
Setting item
Setting value
Description
Measurement
area
Upper line
Measuring range
of Sensor Head
[mm]
Set the measurement start position for the selected measurement area.
When the window for the selected measurement area is open, the start
position can also be edited by dragging the start line on the line bright monitor.
Lower line
Measuring range
of Sensor Head
[mm]
Set the measurement end position for the selected measurement area.
When the window for the selected measurement area is open, the end
position can also be edited by dragging the end line on the line bright monitor.
1
Set the [Upper line] and [Lower line] values
at [Measurement area].
Important
Summary of Contents for ZW-C1*T
