Setting the System
272
ZW-8000/7000/5000
User's Manual
Setting the Synchronous Measurement Mode
3-1 Setting the Measurement Start Timing p.96
Operating procedure
For more detail, refer to the following.
7-1 Connecting Parallel I/O in Confocal Fiber Type Displacement Sensor.
Steps
Key operation
Display
Description
1
Press and hold the
key for two seconds or more to enter the
FUNC mode.
To save the setting, refer to "7-3 Functions of Operating Keys"
(p.222)
2
Press the
/
keys to select “SYSTEM” and press the
key.
3
Press the
/
keys to select “TRIGER” and press the
key.
4
Select the Trigger mode.
AUTO: Internal synchronous measurement mode
PARA.IN: External synchronous measurement mode
ECT.PDO: PDO synchronous measurement mode
The current settings are displayed on the sub digital.
Press the
/
keys to enter the editing mode, and the sub-
display blinks.
In this example, select “PARA.IN” and press the
key.
5
Press and hold the
key for two seconds or more to enter the
RUN mode.
To save the setting, refer to "7-3 Functions of Operating Keys"
(p.222).
Summary of Contents for ZW-7000 Series
