Omron ZUV Series, User Manual

Page: 56 / 126

3-12
Sect
ion 3
SETUP
ZUV
User’s Manual
Section 3
Device Setup Change Setting (Bank)
Switching Banks
Switch the currently selected bank to another bank.
Banks can also be switched from an external device.
• I/O terminal block p.4-3
• USB/RS-232C communication command p.4-14
LOCK mode-[BANK]-[CHANGE]
Copying Banks
Copy the settings of a selected bank to the current bank.
LOCK mode-[BANK]-[COPY]
Clearing Banks
Initialize the content of a bank.
Settings made by [SYSTEM] or [I/O] are not initialized.
LOCK mode-[BANK]-[CLEAR]
Setting value Description
CHANGE Selects the target bank.
Range: BANK1 to BANK16 (Default value: BANK1)
Setting value Description
COPY Selects the copy source bank.
Range: BANK1 to BANK16 (Default value: BANK1)
Setting value Description
CLEAR Selects the target bank.
Range: BANK1 to BANK16, ALL (Default value: BANK1)