Omron ZG2-DSU, User Manual

Page: 37 / 91

Loading Logging Data to an External Device
35
ZG2-DSU User’s Manual
2
LO
GG
ING
FUNC
TI
ONS
Loading Logging Data to an External Device
There are two ways of loading logging data stored on Memory Card to an external device.
Removing the Memory Card and Copying
Logging Data
Before removing a Memory Card from the unit, make sure that the CF power LED and access
LED are both OFF. If a Memory Card is removed with these LEDs still ON, there is the
possibility that data stored on the Memory Card might be lost or the Memory Card or Data
Storage Unit might malfunction.
Removing Memory Cards p.20
Copying Logging Data by Serial
Communication Commands
Logging data can be copied by input of communication commands from an external
device without removing the Memory Card.
By using the command for initializing the Memory Card after a copy, data after the copy
can be deleted to secure free space on the Memory Card for the next logging operation.
Command Description Refere
nce
CFLOGGET Acquires the measurement values saved on the Memory Card. p.61
CFPRFGET Acquires the profiles saved on the Memory Card. p.63
CFFORMAT Initializes the Memory Card. p.70
Important