7
Pause
If the pause switch is triggered, all functions
are locked except parameters, the adjacent
led light up, panel display “PAUSE”
5.9
LOCK THE HOT KEYS AND KEYPAD
if
key is triggered, all functions on the keypad and hot keys are invalid.
5.10
ELECTRONIC HAND WHEEL & HOT KEYS
Turning the hand wheel:
The value of “A23” is 1, electronic hand wheel is activated. By turning the
hand wheel, you can move the needle bar forwards or backwards.
Pressing the hand wheel:
THIS IS A CUSTOMIZABLE HOT KEY!
Default: None
Refer to Parameter list, A05
Pressing the Reverse switch:
THIS IS A CUSTOMIZABLE HOT KEY!
Default: Pressing the key changes the sewing direction.
Refer to Parameter list, A04
6.
OPERATION OF THE SPECIAL FUNCTION INTERFACE
Press
switch to the special function interface from normal function interface, showed
as below:
Display A and B show the SN of function, D~G display contents, press
B+
and
B-
to select
functions:
6.1
Dynamic speed limitation
SN F1
：
display current speed up limitation, the operator can change the speed
limitation during running.
6.2
Production counter
SN F2
：
display the production counter.
6.3
Machine phase
SN F3
：
display the machine phase
6.4
Torque enhancement function at low speed
SN F4
：
display the level
0: off, 10:maximum
6.5
Measure the instant speed
SN F5
：
display the instant speed.
