Wiring
Section 4-5
4-11
4-5
Wiring
Wire the Controller as shown below.
4-5-1
Power Supply and Ground Wires
The power supply and ground terminals use M3 set screws. The following
type of solderless terminals can be connected to these terminals. Tighten
each screw to a torque of approximately 6 kgf
•
cm.
Connection example
Line filter
+24 VDC
Ferrite core (provided)
Ground at a resistance
of less than 100
Ω
V720-CD1D
0 V
100
W