![background image](http://html1.mh-extra.com/html/omron/v640-hs61/v640-hs61_user-manual_741375041.webp)
39
CIDRW System
User’s Manual
SE
CTION 2
Con
n
ec
tions
a
nd Wiring
SECTION 2
Installation and Connections/Wiring
• Dedicated Power Supply Connector and RS-485 Port Connector
Prepare a V640-A90 (can be purchased as an accessory).
• Dedicated Power Supply Cable
Use an AWG20 to AWG24 cable.
Use a dedicated tool for crimping the cable to the connector pins.
• Power Supply
Use a power supply that satisfies the following conditions.
*The maximum power consumption of the Amplifier Unit is 150 mA at 24 VDC(V640-HAM11-V4), 400
mA at 24 VDC(V640-HAM11-L-V2). The inrush current, however, must be considered when selecting
the power supply capacity. A power supply with an output of 650 mA min. at 24 VDC is recommended.
Contents of the V640-A90 set (accessory)
Name
Quantity
When procured individually
Manufacturer
Model
Power supply connector
One
Tyco Electronics
1-178288-3
Pins for power supply con-
nector
Three
175217-3
Connector for RS-485 port
One
Phoenix Contact
MSTB2.5/2-STF-5.08
Recommended Crimping Tool
Manufacturer
Model
Tyco Electronics
919601-1
Recommended Product
Manufacturer
Model
Output current
Input voltage
OMRON
S8VS-01524
24 VDC, 650 mA
100 to 240 VAC
Summary of Contents for V640-HS61
Page 14: ...12 INTRODUCTION Reading this Manual CIDRW System User s Manual INTRODUCTION MEMO...
Page 120: ...118 SECTION 5 When SECS Is Not Used CIDRW System User s Manual SECTION 5 Troubleshooting MEMO...
Page 171: ...CIDRW System User s Manual SECTION 6 Protective Construction SECTION 6 Appendix 169 MEMO...
Page 173: ......