V600-CHUD
Handheld Reader Writer
3
Operation
■
Transmission Distances (Recommended Combinations)
Communication is possible with the V600-series Data Carriers presently being marketed.
■
Diagnostic Functions
Precautions
Observe the following precautions to ensure safe product use.
•
Do not use in environments that include inflammable, explosive, or
corrosive gases.
•
Do not disassemble, repair, or modify the product.
•
Observe all cautions, notes, and precautionary points given in this
document.
•
In the event of an abnormal smell, extreme heating of the product,
smoke, etc., stop using the product immediately and turn OFF the
power.
•
When disposing of the product, treat it as industrial waste.
Handheld Reader Writer
V600-CHUD
Data Carrier (dimensions: mm)
EEP-ROM
V600-D23P53 (Dia. 8
×
5)
0 to 2.5 mm
V600-D23P54 (Dia. 12
×
6)
0 to 4 mm
V600-D23P55 (Dia. 8
×
5)
0 to 10 mm
V600-D23P61 (36
×
24
×
6)
0 to 11 mm
V600-D23P66N (34
×
34
×
3.5)
0 to 17 mm (See note 2.)
V600-D23P66SP (95
×
36.5
×
6.5)
0 to 12 mm
V600-D23P71 (86
×
54
×
1.5)
0 to 25 mm
V600-D23P72 (50
×
34
×
1.5)
0 to 23 mm
S-RAM
V600-D8KR12 (65
×
40
×
15)
0 to 25 mm
V600-D8KR13 (86
×
54
×
10.3)
0 to 20 mm
V600-D2KR16 (65
×
40
×
5)
0 to 10 mm
V600-D8KR04 (86
×
54
×
20)
0 to 35 mm
FeRAM
V600-D8KF04 (86
×
54
×
20)
0 to 18 mm
Note 1.
Data Carrier Installation Conditions
•
V600-D23P53/P54: Embedded in iron.
•
V600-D23P55: Embedded in resin.
•
V600-D23P61: Metal (iron) on the
back surface of the Data Carrier.
•
V600-D23P66N/P66SP/P71/P72:
Resin on the back surface of the Data
Carrier (no metal (iron) on the back
surface)
•
V600-D8KR12/-D8KR04/-D8KF04:
Metal (iron) on the back surface of the
Data Carrier.
•
V600-D2KR16: Data Carrier installed
on a bracket (V600-A81) and attached
to a metal (aluminum) plate.
2.
When using the V600-D23P66N at
temperatures lower than
−
10
°
C,
transmission may not be possible at short
distances. In this case, move the Reader
Writer away from the Data Carrier.
Diagnostic Functions
Checks for CPU errors and transmission errors.
To ensure safety, do not use this product to directly or
indirectly detect people. Do not use this product as a
detection device to protect people.
S-RAM Data Carriers have a built-in lithium battery which
may occasionally cause serious injury by catching on fire,
bursting, or burning. Treat the products as industrial
waste when disposing of them. Do not disassemble them,
alter their shape by applying pressure, or heat or
incinerate them at 100
°
C or higher.
WARNING
Precautions for Safe Use
