Omron SYSMAC-XR005, User Manual

Page: 40 / 64

Backup_E3NW
38 Sysmac Library User’s Manual for EtherCAT N-Smart Series Library (W549)
Related System-defined Variables
Name Meaning Data type Description
_Card1Ready
SD Memory Card
Ready Flag
BOOL
TRUE when the SD Memory Card is
recognized. It is FALSE when the SD
Memory Card is not recognized.
TRUE: Can be used.
FALSE: Cannot be used.
_EC_MBX_SlavTbl
Message Communica-
tions Enabled Slave
Table
Array[1..512] OF BOOL
This table indicates the slaves that
can perform message communica-
tions. Slaves are given in the table in
the order of slave node addresses.
TRUE: Message communications
are possible.
FALSE: Message communications
are not possible.
Troubleshooting
Error code
Expansion
error code
Status Description Correction
16#0000 16#00000000 Normal End --- ---
16#3C0F 16#00000001 VenderID Not
Matched The VenderID in object lists
does not match the VenderID of
the backup target node. Use object lists that match the
VenderID of the backup target
node.
16#3C0F 16#00000002 ProductCode
Not Matched The ProductCode in object lists
does not match the Product-
Code of the backup target
node. Use object lists that match the
ProductCode of the backup tar-
get node.
16#3C0F 16#00000003 Unsupported
Sensor Amplifier
Unit A Sensor Amplifier Unit that is
not supported by this function
block is connected. Check that the Sensor Ampli-
fier Unit is supported by this
function block.
16#3C0F 16#00000004 Unsupported
Device The device is not supported by
this function block. Check that the specified device
is an E3NW Unit.
16#0400 16#00000000 Input Value Out
of Range The value of NodeAdr is out of
range.
Set the value of NodeAdr cor-
rectly.
The directory name specified
with
DirName contains one or
more characters that cannot be
used.
Set DirName correctly.
The directory name specified
with
DirName is too long.
Check the length of the direc-
tory name specified with
Dir-
Name and set it to within the
valid range.
16#1400 16#00000000 SD Memory
Card Access
Failure An SD Memory Card is either
not inserted or is not inserted
properly. Insert an SD Memory Card cor-
rectly.
The SD Memory Card is bro-
ken. Replace the SD Memory Card
with one that operates nor-
mally.
The SD Memory Card slot is
broken. If this error persists even after
making the above two correc-
tions, replace the CPU Unit or
the Industrial PC.