Omron SYSMAC WS02-NSFC1-E, Setup Manual

Page: 8 / 23

vii
About this Manual:
This manual describes the overview and installation of the WS02-NSFC1-E Face Plate Auto-Builder for
NS. The Face Plate Auto-Builder for NS is a software package used to automatically build project files
for the CS1W-LC001 Loop Control Unit and the CS1W-LCB01 and CS1W-LCB05 and CS1D-LCB05D
Loop Control Boards used with NS-series Programmable Terminals. These files are based on the tag
files created using CX-Process Tool.
The project files that are created are configured using the Face Plate Screens for the Loop Control Unit.
Please read this manual carefully and be sure you understand the information provided before
attempting to install and operate the Face Plate Auto-Builder for NS. Please read the following manuals
carefully and be sure you understand the information provided before setting up the Loop Control
Unit/Board and NS-series PT System
Related Manuals to the Loop Control Unit/Board
Product Manual name Cat. No. Contents
WS02-NSFC1-E
Face Plate Auto-Builder
for NS Face Plate Auto-Builder for NS
Operation Manual
W418
Installation and operation
procedure for Face Plate
Auto-Builder for NS.
WS02-LCTC1-EV3
CX-Process Tool CX-Process Tool
Operation Manual W372 Installation and operation
procedures for the CX-Process
Tool.
WS02-LCTC1-E
CX-Process Monitor CX-Process Monitor
Operation Manual W373 Installation and operation
procedures for the CX-Process
Monitor.
CS1W-LC001
Loop Control Unit Loop Control Unit
Operation Manual W374 Installation and operation
procedures for the Loop Control
Unit (except for function
blocks).
CS1W-LCB01/05
CS1D-LCB05D
Loop Control Boards Loop Control Board
Operation Manual W406 Installation and operation
procedures for the Loop Control
Boards (except for function
blocks).
CS1W-LC001
Loop Control Unit Loop Control Unit
Function Block
Reference Manual W375 Detaild information on function
blocks for Loop Control Units.
CS1W-LCB01/05
CS1D-LCB05D
Loop Control Boards Loop Control Board
Function Block
Reference Manual
W407
Detailed information on function
blocks for Loop Control Boards
Related Manuals to the NS-series PT
Product Manual name Cat. No. Contents
NS-series PT NS Series Setup Manual V072 Describes connecting the PT to the host and
peripheral devices, methods to setup communications
and operation, and procedures for maintenance.
NS-series PT NS Series Programming
Manual V073 Describes the screen configurations, object functions,
and host communications for the PT.
NS-NSDC1-EV
NS-Designer NS-Designer Operation
Manual V074 Describes operating procedures for the NS-Designer,
which is used to create the screens displayed on the
PT and transfer them to the PT. It includes screen
creation and transfer procedures.
!WARNING
Failure to read and understand the information provided in this manual may result in
personal injury or death, damage to the product, or product failure. Please read each
section in its entirety and be sure you understand the information provided in the section
and related sections before attempting any of the procedures or operations given.