![background image](http://html1.mh-extra.com/html/omron/sysmac-ws02-nsfc1-e/sysmac-ws02-nsfc1-e_setup-manual_744243012.webp)
Application Precautions
4
xi
event of incorrect, missing, or abnormal signals caused by broken signal lines,
momentary power interruptions, or other causes.
!Caution
Confirm that no adverse effect will occur in the system before attempting any
of the following:
• Changing the operating mode of the PLC
• Force-setting/force-resetting any bit in memory
• Changing the present value or any set value in memory
!Caution
Be sure that all mounting screws, terminal screws, and cable connector
screws are tightened to the torque specified in the user manuals. Incorrect
tightening torque may result in malfunction.
!Caution
Confirm operation of any user programs that you develop before running the
programs.
!Caution
Confirm the operation of screen data and host programs before using the
programs for actual applications.
!Caution
Always use the upper and lower limit settings when using numeral input to
prevent malfunctions.
!Caution
When transferring data in screen units, also transfer any other data for the PT
memory that has changed.
Summary of Contents for SYSMAC WS02-NSFC1-E
