Omron SYSMAC-SE2, Practices Manual

Page: 26 / 54

2-1 Target Data for the Sysmac Studio/
EPLAN Electric P8 Connector Func-
tion
The target of the connector function consists of the information of a CPU Unit, the following Units con-
nected to the CPU Unit, and the associated device variables.
Refer to the reference for each target for details on the supported unit models and device variables.
Target data Description Reference
EtherCAT slaves The models, revisions, and node addresses of EtherCAT slaves
are included. The EtherCAT network configuration is excluded. 2-1-2 EtherCAT
Slaves
on page
2-2
NX Unit configura-
tion This refers to a Slave Terminal configuration of EtherCAT Coupler
Units and a CPU Rack configuration of NX-series CPU Units
*1
.
The NX Unit configuration and the models, unit versions, and unit
numbers of NX Units are included.
2-1-3 NX Units on
page 2-4
CJ-series Unit con-
figuration This refers to a CPU/Expansion Rack configuration of NJ-series
CPU Units. The CJ-series Unit configuration and the models, unit
versions, and unit numbers of CJ-series Units are included. 2-1-4 CJ-series
Units
on page 2-6
Device variables Device variables are variables accessing the data in devices in a
controller configuration through external interface ports called I/O
ports. The variable names and comments of the device variables
assigned to the target I/O ports are included. 2-1-5 Device Varia-
bles
on page 2-7
*1. The NX701 CPU Unit is excluded.
Additional Information
Data that is not included in the above table, such as Option Boards, are excluded.
2-1-1
CPU Units
The connector function supports the following CPU Unit models.
Model number
NJ101-9000
NJ101-1000
NJ301-1100
NJ301-1200
NJ501-1300
NJ501-1400
NJ501-1500
Model number
NX102-9000
NX102-1000
NX102-1100
NX102-1200
NX102-9020
NX102-1020
NX102-1120
NX102-1220
Model number
NX1P2-1040DT
NX1P2-1040DT1
NX1P2-1140DT
NX1P2-1140DT1
NX1P2-9024DT
NX1P2-9024DT1
Model number
NX701-1600
NX701-1700
NX701-1620
NX701-1720
2-1-2
EtherCAT Slaves
The connector function supports the following slave models.
2 Target Data and Preconditions for the Sysmac Studio/EPLAN Electric P8 Connector Function
2-2
Sysmac Studio Electrical CAD Connector Function Practices Guide for AutomationML Import (EPLAN Electric P8) (P156)