Chapter 1
1-6
Communications Methods
●
Communications Settings and Operation
With 3G3JE Communications Models, communications parameters are set in the initial settings
mode. Before communicating with the 3G3JE, use the Digital Operator keys to set all of the parame-
ters. For details on making settings other than communications parameters, refer to the 3G3JE
User's Manual.
• While the motor is stopped, the mode can be changed from RUN mode or adjustment mode to ini-
tial settings mode at any time by pressing the Mode Key for one second or longer.
• The mode can be changed from initial settings mode to RUN mode by pressing the Mode Key for
one second or longer while a parameter name (P01 to P21) is displayed. (To display a parameter
name, press the Enter Key while the set value is displayed.)
• After a set value has been changed, it goes into effect when the mode is changed to RUN mode. If
the power is turned OFF while a parameter is being set and before RUN mode is entered, the
changed set value will be lost.
Summary of Contents for SYSDRIVE 3G3JV
Page 1: ...Cat No I548 E1 01 COMMUNICATIONS MANUAL 3G3JE Compact Simplified Inverters...
Page 14: ...Chapter 1 Communications Methods 1 1 Overview of Communications Methods...
Page 38: ...Chapter 3 Communications Data 3 1 Variable Area Setting Range List 3 2 Status...
