No.18S110-02
53/71
STC-MBS202POE / STC-MCS202POE
Product Specifications and User’s Guide
10.17 Counter And Timer Control
Controls “Timer” and “Counter”.
A) Timer Control
GenICam Parameters
TimerSelector
IEnumeration Type
Fixed as “Timer 0”
TimerDelay
IFloat Type
Delay for “Timer 0 active” signal (in µsecond)
Range: 0 to 16,777,215
Default: 0
TimerDuration
IFloat Type
Duration of “Timer 0 active” signal (in µsecond)
Range: 1 to 16,777,215
Default: 1
TimerTrigger
Source
IEnumeration Type
Reference signal selection to generate “Timer 0 active” signal
Default: “Off”
TimerTrigger
Activation
IEnumeration Type
Polarity of reference signal to generate “Timer 0 active” signal
Default: “Rising Edge”
TimerValue
IFloat Type
Returns value for “Timer 0 active” signal
When the timing of “Timer 0 active” signal is adjusting to active signal of Exposure, “Timer 0” can be used as
strobe control signal.
B) Counter Control
GenICam Parameters
CounterSelector
IEnumeration Type
Counter selection
Default: “Counter 0”
CounterEvent
Source
IEnumeration Type
Counter event source selection
CounterReset
Source
IEnumeration Type
Reference signal selection to reset counter
CounterReset
Activation
IEnumeration Type
Polarity of reference signal to reset counter
CounterReset
ICommand Type
Rest switch
“Activate as switch when selecting “Software” at “Counter Reset Source”
CounterValue
IInteger Type
Returns number of counter
