No.18S110-02
11/71
STC-MBS202POE / STC-MCS202POE
Product Specifications and User’s Guide
5 Specifications
5.1
Electronic Specifications
Product
STC-MBS202POE
STC-MCS202POE
Image Sensor
1/1.7” 2M Progressive Monochrome CMOS
(SONY: IMX430)
1/1.7” 2M Progressive Color CMOS
(SONY: IMX430)
Shutter Type
Global Shutter
Active Picture Elements
1,624 (H) x 1,240 (V)
Cell Size
4.5 (H) x 4.5 (V) µm
Sync System
External trigger (Hardware / Software) / Free run
Scanning Mode
Full scanning (Full resolution)
/ ROI
Frame rate (at full scanning)
8bits: 54.6 fps
/ 10bits: 27.3 fps / 10bits Packed: 36.4 fps /
12bits: 27.3 fps / 12bits Packed: 36.4 fps / RGB8: 18.2 fps
Maximum frame rate: 1,625.29 fps @ 8 lines (8bits)
ADC bit depth
12bits
Image Output Format
Mono8
/ Mono10 / Mono10Packed /
Mono12 / Mono12Packed
Mono8 / Mono10 / Mono10Packed /
Mono12 / Mono12Packed /
BayerRG8
/ BayerRG10 / BayerRG10Packed /
BayerRG12 / BayerRG12Packed / RGB8
Noise
Level
8bits output
Less than 1.8 digits (Gain 0 dB)
10bits / 10bits Packed output
Less than 7.2 digits (Gain 0 dB)
12bits / 12bits Packed output
Less than 28.8 digits (Gain 0 dB)
Sensitivity (*1)
320 Lux
580
Lux
Exposure Time
1 µseconds to 16.777 seconds
(Default: 18,166 µseconds)
Gain
Analog Gain
0 to 20.8 dB
(Default: 0 dB)
Digital Gain
x1 to x3
(Default: x1)
ROI
Horizontal: 8 to 1,624 pixels, Vertical: 8 to 1,240 lines
(Default: 1,624 x 1,240)
Adjustable steps for size: 8 pixels in horizontal direction and 8 lines in vertical direction
Adjustable steps for offset: 8 pixels in horizontal direction and 8 lines in vertical direction
Gamma
Gamma 0.1 to 4.0
(Default: 1.0)
Binning
Horizontal and Vertical binning (2x2) /
Off
N/A
Decimation
Horizontal and Vertical decimation (2x2) /
Off
Image Flip
Horizontal / Vertical / Horizontal and Vertical /
Off
Defective Pixel Correction
Up to 2,048 points (
Default: On
)
Auto
Image
Control
Auto Exposure
Support
(Default: OFF)
Auto Gain
Support
(Default: OFF)
Auto White Balance
N/A
Auto /
Manual
/ Push to Set
Operational Mode
Edge preset trigger / Pulse width trigger /
Free run
Interface
PoE: IEEE802.3af CLASS2 (1000BASE-T)
Protocol
GigE Vision 2.1 and GenICam SFNC 2.4, IEEE1588 (PTP)
I/O
One opto-isolated input, one opto-isolated output and one open collector GPIO (Input or output)
Power
Input Voltage (*2)
+10.8 to +26.4 Vdc External power (via 6 pin connector) /
Power Over Ethernet (IEEE802.3af)
Consumption
+12 V / +24 V: 3.9 W, PoE: 4.9 W
Default:
Bold