No.16S121-03
40/64
STC-MBS891U3V / STC-MCS891U3V / STC-MBS123BU3V / STC-MCS123BU3V
Product Specifications and Use’s Guide
Restriction of ROI operation
・
Region 0 is always ON
・
Region(X+Y) can be enable (On) after sets ON Region (X) and Region (Y).
(X, Y: Region number, X is any number from 1 to 3, Y is any number from 4, 8 and 12)
・
The following restriction exist to set region’s Width, Height, OffsetX and OffsetY
Width[RegionN] = Width[Region(N+4)] = Width[Region(N+8)] = Width[Region(N+12)]
Height[RegionN] = Height[Region(N+4)] = Height[Region(N+8)] = Height[Region(N+12)]
OffsetX[RegionN] = OffsetX[Region(N+4)] = OffsetX[Region(N+8)] = OffsetX[Region(N+12)]
OffsetY[RegionN] = OffsetY[Region(N+4)] = OffsetY[Region(N+8)] = OffsetY[Region(N+12)]
(N: Region Number 0to3)
・
Overlapped region setting is invalid
・
When setting the Horizontal flip, Vertical flip, Horizontal Vertical flip, position of region 0 to 15 are changed.
Please refer to the drawing that follows.
・
All of selected data outputs as single image data.
・
If Binning / Decimation is enable, obtained Width and Height values are as “Binning/Decimation” ed value.
Region number and position setting on Horizontal Vertical flip.
Region15
Region14
Region13
Region12
Region11
Region10
Region9
Region8
Region7
Region6
Region5
Region4
Region3
Region2
Region1
Region0
OffsetX
[Region0]
OffsetY
[Region0]
WidthMax
OffsetY
[Region4]
OffsetY
[Region8]
OffsetX
[Region1]
OffsetX
[Region2]
Width[Region3]
H
eig
ht
[R
eg
io
n1
2]
H
eig
ht
M
ax
OffsetX
[Region3]
OffsetY
[Region12]
Width[Region2]
Width[Region1]
Width[Region0]
H
eig
ht
[R
eg
io
n8
]
H
eig
ht
[R
eg
io
n4
]
H
eig
ht
[R
eg
io
n0
]