No.19S182-01
11/73
STC-MBA503POE / STC-MCA503POE
Product Specifications and User’s Guide
5 Specifications
5.1
Electronic Specifications
Product
STC-MBA503POE
STC-MCA503POE
Image Sensor
1/2.5” 5M Progressive Monochrome CMOS
(ON-Semiconductor: MT9P031)
1/2.5” 5M Progressive Color CMOS
(ON-Semiconductor: MT9P031)
Shutter Type
Global Rest /
Rolling Shutter
Active Picture Elements
2,592 (H) x 1,944 (V)
Cell Size
2.2 (H) x 2.2 (V) µm
Scanning Mode
Full scanning (Full resolution)
/ ROI
Frame
rate
(at full
scanning)
Rolling shutter, free run
8bits: 14 fps
/ 10bits: 10.9 fps / 10bits Packed: 14 fps /
12bits: 10.9 fps / 12bits Packed: 14 fps / RGB8: 7.2 fps
Maximum frame rate: 2,499 fps @ 2 lines (8bits)
Rolling shutter, free run /
Global reset
8bits / 10bits / 10bitsPacked / 12bits / 12bitsPacked / RGB8: 4.7 fps
ADC bit depth
12bits
Image Output Format (*1)
Mono8
/ Mono10 / Mono10Packed /
Mono12 / Mono12Packed
Mono8 / Mono10 / Mono10Packed /
Mono12 / Mono12Packed /
BayerRG8
/ BayerRG10 / BayerRG10Packed /
BayerRG12 / BayerRG12Packed / RGB8
Noise
Level
8bits output
Less than 3.7 digits (Gain 0 dB)
10bits / 10bits Packed output
Less than 14.8 digits (Gain 0 dB)
12bits / 12bits Packed output
Less than 59.2 digits (Gain 0 dB)
Sensitivity (*2)
800 Lux
2,000 Lux
Exposure Time
32 µseconds to 16.777 seconds
(Default: 107,488 µseconds)
Gain
Analog Gain
x1 to x7.875
(Default: x1)
Digital Gain
x1 to x5
(Default: x1)
ROI
Horizontal: 8 to 2,592 pixels, Vertical: 2 to 1,944 lines
(Default: 2,592 x 1,944)
Adjustable steps for size: 8 pixels in horizontal direction and 2 lines in vertical direction
Adjustable steps for offset: 8 pixels in horizontal direction and 2 lines in vertical direction
Gamma
Gamma 0.1 to 4.0
(Default: 1.0)
Binning
Horizontal: 1/2, 1/4,
Off
/ Vertical: 1/2, 1/4,
Off
Decimation Function
Horizontal: 1/2, 1/3, 1/4, 1/5, 1/6, 1/7,
Off
/ Vertical: 1/2, 1/3, 1/4, 1/5, 1/6, 1/7,
Off
Image Flip
Horizontal / Vertical / Horizontal and vertical /
Off
Defective Pixel Correction
Up to 2,048 points
(Default: On)
Auto
Image
Control
Auto Exposure
Support
(Default: OFF)
Auto Gain
Support
(Default: OFF)
Auto White Balance
N/A
Support
Operational Mode
Edge preset trigger / Pulse width trigger /
Free run
Interface
PoE: IEEE802.3af CLASS2 (1000BASE-T)
Protocol
GigE Vision 2.1 and GenICam SFNC 2.4, IEEE1588 (PTP)
I/O
One opto-isolated input, one opto-isolated output and one open collector GPIO (Input or output)
Power
Input Voltage (*3)
+10.8 to +26.4 Vdc External power (via 6 pin connector) /
Power Over Ethernet (IEEE802.3af)
Consumption
+12 V / +24 V: 3.0 W, PoE: 3.4 W
Default:
Bold