![background image](http://html.mh-extra.com/html/omron/stc-fdr/stc-fdr_user-manual_743384021.webp)
21
section, trigger condition for registered
camera’s video can be specified.
→
See 6.3.2 Motion Detection / 6.3.4 Master
Image Comparison
6
Common settings for all
cameras
Sets detection interval of trigger events.
7
Recording target
Selects camera to record video when event is
occurred.
※1:
If you set the recording time to 1 second or more ago, the recording file will continue to
be created even if the trigger does not occur, so be careful about the limit on the
number of times you can write to the recording medium.
6-3-1. Time Trigger
Time trigger recording allows camera to record video at specified time.
[1]
Setting time trigger
1) Click the [Setting] button in the main window, then select [Trigger recording settings]
tab in the Advanced setting window.
2) Select [Time trigger] in the Event signal section.
3) Configure the recording time.
4) Configure the trigger occurrence time
5) Close the Advanced Setting window by clicking the [OK] button.
[2]
Starting trigger recording
6) Select [Trigger recording] in the main window.
7) If [REC] button is clicked, status will change to waiting trigger.
→
Recording will start on the configured time (near time set in the recording time setting)
[3]
Confirming recorded video
8) Click the [History] button in the main window and confirm
(
See
2)
3)
4)
6)
7)