Promi-SD™ User Manual ver 1.0 Model: Promi-SD202-OA
www.initium.co.kr
24
48-bit BD_ADDR input operation, the SD is designed to store the BD_ADDR of
its latest counterpart.
1. Set one SD to do INQUIRY SCAN and PAGE SCAN operation as directed in
section 3.3.
2. Set the other SD to connect to the SD in the previous step.
3. Once connected successfully, both SD units store the BD_ADDR of their
counterpart in their internal Flash. When desired, release the connection as
directed in section 3.4.
4. Set the operating mode of one SD to MODE 1 by entering an ‘AT+ BTMODE’
command as shown below.
5.
Set the operating mode of the other SD to MODE 2 by entering an
‘AT+BTMODE’ command as show below.
6. Turn both SD units power off. The SD pair will connect automatically when
they are powered up again.
7. To release this paring, set them to MODE 0 by entering ‘AT+BTMODE, 0’. or
reset the units by pressing the RESET button.
AT+BTMODE,0
OK
AT+BTCANCEL
OK
AT+BTMODE,2
OK
AT+BTMODE,1
OK
