Promi-SD™ User Manual ver 1.0 Model: Promi-SD202-OA
www.initium.co.kr
16
Uart:
To change the Baud rate/Parity/StopBit, please use this Uart setting menu.
*NOTE: Please do not confuse with PromiWIN configuration menu.
PromiWIN configuration menu will only set the configuration of
PromiWIN.
To Change the configuration of Promi-SD, users must
use this Uart setting menu in Red circle above.
Security Option:
Users may set the security option. Authentication/ Encryption/
password.
Device Name:
Users may change the device name to be more friendly.
Signal:
If users want to remove the response signals from Promi-SD, such as
OK, CONNECT, DISCONNECT, ERROR on each events, users may
turn off the signal here. This can be done by ATS10=n command.
6. Click the ‘Connection(in)’ icon in list control box. Check both options and then
click the ‘Start’ button as shown in Figure 3. The SD1 now starts INQUIRY
SCAN and PAGE SCAN operations. During the operation, the STATUS LED
will flash green, twice every 3 seconds.
