61
Replacing the Unit
Section 4-4
4-4
Replacing the Unit
4-4-1
Replacement Precautions
The PRT1-SCU11 is a network device. If the Unit is damaged, it will effect the
entire Network, so always ensure repairs are undertaken immediately. It is
recommended to have a spare PRT1-SCU11 on hand so that repairs may be
conducted quickly.
Replacement Precautions
Observe the following precautions when replacing the Unit.
• Always turn OFF the power before replacing the Unit.
• Ensure that the new Unit is not faulty.
• If a poor connection is suspected of causing the malfunction, clean the
connectors using a clean, soft cloth and industrial-grade alcohol. Remove
any lint or threads left from the cloth, and remount the Unit.
• When returning a faulty unit for repair, always attach a detailed fault
report to the unit and return it to the nearest OMRON dealer.
Note
1.
In order to prevent faulty operation be sure to turn off the power to all mas-
ter and slave devices before replacing the Unit.
2.
When replacing the Unit, do not reconnect it to the Network before carrying
out the procedures listed below.
Summary of Contents for PROFIBUS DP GATEWAY
