Omron NYB17-*100 SERIES, User Manual

Page: 82 / 194

Locking and Removing the Power Connector
The power connector automatically locks into place when the black part of the connector is held and
pushed in.
B
A
Pushing both orange sliders B towards the end of the connector A will release the lock when remov-
ing the connector.
4-2-2
I/O Connector Specifications
Details of the I/O connector are provided below.
The I/O connector can be locked to prevent unintentional disconnection.
The connector can only be inserted in the correct way.
The Lock-and-Release Latch connector is a Phoenix Contact type DFMC 1,5/ 3-ST-3,5-LR BK
(1711658).
Item Specifications
Conductor isolation rating 90°C
Termination rating 90°C
4 Specifications
4 - 14
NY-series Industrial Box PC Without Operating System User's Manual (W586)