Omron NX102-10 Series, User Manual

Page: 45 / 68

Boo
lean
Bit strings Integers
Real
num-
bers
Times, durations,
dates, and text strings
BOOL
BYTE
WORD
DWORD
LWORD
USINT
UINT
UDINT
ULINT
SINT
INT
DINT
LINT
REAL
LREAL
TIME
DA
TE
T
OD
DT
STRING
DstNetAdr Refer to Function on page 3 - 5 for details on the structure _sDNET_ADR.
CommPort For enumeration_ePORT enumerator, refer to Function on page 3 - 5.
SrcDat[] ar-
ray
OK
SendSize OK
DstArea For enumeration_eAREA enumerator, refer to Function on page 3 - 5.
DstCh OK
Option Refer to Function on page 3 - 5 for details on the structure _sRESPONSE.
Function
When Execute changes from FALSE to TRUE, SrcDat[] is written to the area at the send destination
specified by DstNetAdr , CommPort , DstArea , and DstCh .
The data type of DstNetAdr is structure_sDNET_ADR. The specifications are shown below.
Variable Name Contents Data type Valid range Unit
Initial
value
DstNetAdr
Network ad-
dress at send
destination
Network address at
send destination _sDNET_AD
R
--- --- ---
NetNo
Network ad-
dress
Network address USINT 0 to 127
---
0
NodeNo Node address Node address USINT
Depends on
the data type
UnitNo Unit address Unit address BYTE
Depends on
the data type
16#00
The data type of CommPort is enumeration_ePORT.
The meaning of the enumerator of enumeration_ePORT is as follows.
Enumerator Meaning
_NONE The send destination is not a serial port (host link mode).
The data type of DstArea is enumeration_eAREA.
The meaning of the enumerator of enumeration_eAREA is as follows.
Enumerator Meaning
_CIO Core I/O Area, Work Area, etc.
_WR Work Area
_HR Holding Area
_TIMER Timer Area
_COUNTER Counter Area
_DM
Data Memory Area
_EM0 0 bank area of Expansion Memory Area
⋮ ⋮
3 Client Function
3 - 5
NX-series CPU Unit FINS Function User's Manual (W596)
FINS Communications Instructions
3
Send