background image

How to Fill the Medication

10

Correct Use of the Unit 

How to Fill the Medication 

1

Remove the Medication
Bottle from the Main Unit.

Lift up the Medication Bottle by
pushing in the Medication Bottle
Disengaging Buttons on both sides
and releasing the engagement.

2

Remove the Mesh Cap.

Hold the Medication Bottle as if by
covering it with your hand.

3

Fill the medication.

Fill the medication as shown in the
Figure. 

- The maximum capacity of

Medication Bottle is 7 ml.

4

Install the Mesh Cap.

- If the Mesh Cap is not securely

closed, medication may leak.

Medication Bottle
Disengaging Button

Insert the Mesh Cap 
perpendicular to the 
Medication Bottle.

Do not insert your 
finger into the 
Nebulization Port.

Do not open 
the Bottle Cap.

Remove the Mask Adapter, Mouthpiece, or Inhalation Mask (S), then fill the
medication.

Lift up the Mesh Cap by
applying your thumb on
the brim.

Lift up the
Mesh Cap
perpendicular
to the
Medication
Bottle.

Align these points,
then push in as far
as it goes.

Close the Mesh Cap

securely.

Do not insert your 
finger into the 
Nebulization Port.

EN-p2-20-(NE-U22)-3  3/25/02  4:48 PM  Page 10

Summary of Contents for Micro A-I-R NE-U22





















Reviews: