26
3.Using the Unit
3.
Press the MEMORY button again,
while the average values screen is
displayed.
The result from the most recent
measurement is displayed.
The date and time of each
measurement is displayed alternately
with the measurement values.
Note:
If your systolic or diastolic pressure is
outside the standard range, the
heartbeat symbol will blink when the
measurement result is displayed. Refer
to 3.3, Important.
4.
Press the MEMORY button
repeatedly to cycle through the
previous measurement results.
Keep the button pressed down to
cycle rapidly through the previous
results.
If the irregular heartbeat symbol was displayed at the time of a
measurement, this is displayed when that result is displayed.
5.
Press the I/O button to turn the unit off.
If you forget to turn the unit off, it will automatically shut itself off
after five minutes.
HEM-4011C-EN-RU.book Page 26 Tuesday, June 28, 2011 10:30 AM
