4
ZX Series (ZX-L-N)
Smart Sensors (Laser Type)
■
Sensor Heads (Through-beam)
Item
Model
ZX-LT001
ZX-LT005
ZX-LT010
ZX-LT030
Optical system
Through-beam
Light source
(wave length)
Visible-light semiconductor laser with a wavelength of 650 nm
EN class 1, FDA class II
Maximum output
0.2 mW max.
0.35 mW max.
0.2 mW max.
Measurement width
1-mm dia.
1- to 2.5-mm dia. 5 mm
10 mm
30 mm
Measurement
distance
0 to 500 mm
500 to 2,000 mm 0 to 500 mm
Minimum sensing
object
8-
µ
m dia.
(opaque)
8- to 50-
µ
m dia.
(opaque)
0.05-mm dia. (opaque)
0.1-mm dia. (opaque)
0.3-mm dia. (opaque)
Resolution*1
*1. This value is obtained by converting the deviation (
±
3
σ)
in the linear output that results when the sensor head is connected to the amplifier unit,
into the measurement width.
4
µ
m *2
*2. For an average count of 64. The value is 5
µ
m for an average count of 32.
This is the value that results when a minimum sensing object blocks the light near the center of the 1-mm measurement width.
---
4
µ
m *3
*3. For an average count of 64. The value is 5
µ
m for an average count of 32.
12
µ
m *4
*4. For an average count of 64. The value is 15
µ
m for an average count of 32.
Temperature
characteristic
±
0.2% FS/
°
C
±
0.3% FS/
°
C
Ambient illumination
Incandescent lamp: 10,000 l
×
max. (on light-receiving side)
Ambient temperature
Operating: 0 to 50
°
C, Storage:
−
25 to 70
°
C (with no icing or condensation)
Ambient humidity
Operating: 35% to 85% (with no condensation)
Degree of protection
IEC60529, IP40
Connection method
Connector relay (standard cable length: 500 mm)
Weight (packed state) Approx. 220 g
Approx. 450 g
Cable length
Extendable up to 10 m with special extension cable.
Materials
Case
Polyether imide
Zinc die-cast
Cover
Polycarbonate
Front filter Glass
Tightening torque
0.3 N
⋅
m max.
Accessories
Instruction sheet, Sensor Head-Amplifier Connection Cable
Optical axis adjustment seal
Mounting Bracket