7. Descriptions of Operation
KP100L Quick Installation Guideline
24
(1) In the country selection display, select the items that you want to set by the “<<” and “>>” key and
you decide the item by the ENT key.
(2) In the last confirmation display of country setting, fix the country setting when you push the ENT key
for 5 second. You can return to the country selection display, when you push the MODE key.
(3) While the last confirmation display of country setting, the country name does the blinking display.
The key operation becomes invalid. After 5 second, display change to next display.
(4) In the last display of the setting country, the country name does the lighting display.
The key operation becomes invalid. After 5 second, display change to next display.
Procedure of the country setting confirmation
Make sure that the country setting is correct. Refer to the below Figure about the setting.
(1) In the normal display, if you press the MODE key for 5 second, display change to the selection
display.
(2) In the selection display, push >> and choose "Check".
(3) After you choose “Check“, push the ENT key.
(4) Display shows the country setting. Make sure the name of a country .
(5) Push the MODE key to return the selection display. After that push the MODE key to return normal
display
The country setting
(1)
(2)
(3)
(4)
Setup:Country
[GER]
Setup:Country
[FRA]
>>
<<
>>
<<
ENT
MODE
Setup:Country
[GER] OK?
Setup:Country
GER
To the Normal Display
Setup:Country
GER
Blinking the Display [3]
Push the ENT Key for 5 second
After 5 second pass
After 5 second pass
Pac 30s
0.00/0.00/0.00kW
Push the MODE key for 5 second
(1)
(2)
(3)
Push the MODE key
or
No operation for 150seconds
Push the ENT key
Push the MODE key
Check:Country
GER
(4)
Push the ENT key
Push the MODE key
ModeSelect
Setup
[Check]ErrL
ModeSelect
ErrLog
[Setup] Che
Push the MODE key
or
No operation for 150seconds
