background image

1

Temperature Monitoring Relay

K8AK-TH

Compact and Slim Relay Ideal for 
Temperature Alarms and Monitoring

• Excessive temperature increases can be prevented and 

abnormal temperatures can be monitored.

• Temperature monitoring in slim design with a width of just 

22.5 mm.

• Rotary switches simplifies temperature settings.
• Universal-input support for thermocouple or platinum 

resistance thermometer sensor input.

• Change the output relay between normally open and 

normally closed operation.

• Alarm status identification with LED indicator.

Self-holding output.

Ordering Information

K8AK-TH (Temperature Input Models)

* Refer to 

Setting Ranges

 on page 3 for the setting ranges.

Note:

When ordering, designate the power supply specification. Different Relay models are used for 100 to 240 VAC and 24 VAC/VDC.

Refer to 

Safety Precautions

 on page 8.

For the most recent information on models that have been certified for 
safety standards, refer to your OMRON website.

Power supply 

voltage

Type

Output relays

Input types

Setting units (setting range)

Model

100 to 240 VAC Temperature 

input

1 relay

Thermocouple or platinum 
resistance thermometer

Setting unit: 1

°

C or 1

°

F (0 to 999

°

C/

°

F) K8AK-TH11S 100-240VAC

Thermocouple

Setting unit: 10

°

C/

°

F*

K8AK-TH12S 100-240VAC

24 VAC/DC

Thermocouple or platinum 
resistance thermometer

Setting unit: 1

°

C or 1

°

F (0 to 999

°

C/

°

F) K8AK-TH11S  24VAC/DC

Thermocouple

Setting unit: 10

°

C/

°

F*

K8AK-TH12S  24VAC/DC

Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]

Summary of Contents for K8AK-TH










Reviews: