![background image](http://html1.mh-extra.com/html/omron/k8ak-ls/k8ak-ls_manual_742722005.webp)
K8AK-LS
5
Nomenclature
Front Panel
●
Indicators
●
Setting Knobs
Note: 1.
Use solid-core wires of 2.5-mm
2
max. or ferrules with an
insulation sleeve to wire to this terminal.
To ensure the dielectric strength of the connection, do not
expose more than 8 mm of wire for insertion into the
terminal.
Recommended ferrules
Phoenix Contact
•
Al 1,5-8BK (for AWG16)
•
Al 1-8RD (for AWG18)
•
Al 0,75-8GY (for AWG18)
2.
Screw tightening torque: 0.49 to 0.59 N·m
Operation Method
DIP Switch Settings
The operating mode is set using the DIP switch located at the
bottom of the Unit. The K8AK-LS does not have SW2.
●
DIP Switch Function
Note:
All pins are set to OFF by default.
Operating time kno
b
Po
w
er indicator
Relay stat
u
s indicator
Operating resistance kno
b
Terminal
b
lock
(See notes 1 and 2.)
Terminal
b
lock
(See notes 1 and 2.)
Item
Description
Power indicator (PWR: Green)
Lit when power is being sup-
plied.
Relay status indicator (RY: Yellow) Lit when contacts are operating.
Item
Description
Operating resistance knob
Used to set the resistance to 10
to 100 k
Ω
.
Operating time knob
Used to set the operating time
to 0.1 to 10 s.
8
mm max.
8
mm max.
For a solid
w
ire
of 2.5-mm2 of max.
For ferr
u
les
w
ith
an ins
u
lation slee
v
e.
Pin
OFF
●
↑
ON
❍
↓
Operat-
ing mode
Automatic liquid supply operation
●
Not
used.
Automatic liquid discharge opera-
tion
❍
S
W
1
DIP s
w
itch pins
O
N
OFF
S
W
2
1
OFF
O
N
2
Summary of Contents for K8AK-LS
Page 9: ...MEMO 9 ...
Page 10: ...MEMO 10 ...