7
K3MA-J
Parameter Initialization
This function returns all of the parameters to their initial values.
Use this to reset the K3MA-J after returning it to its factory-set condi-
tion.
Average Processing
Average processing stabilizes displayed values to minimize flicker by
averaging the fluctuating input signals. Average processing can be
performed for the measurement values in either of four steps (OFF, 2
times, 4 times, or 8 times).
This is useful for ignoring rapid fluctuations, e.g., eliminating spike
noise.
Hysteresis (Comparative Output
Models Only)
The hysteresis of comparative outputs can be set to prevent chatter-
ing in the output when the measurement value fluctuates finely near
the OUT value.
Zero-limit Function
The zero-limit function changes any value below the set value to
zero. This is useful when you want to change negative values to zero
rather than display them, or when you want to make the display in the
smallest part of the input range zero.
Changing the Display Color
The color of the value displayed can be set to either red or green. For
comparative output models (
K3MA-J-A2)
, the display color can be
set to change from green to red, or from red to green, according to
the status of the comparison criterion.
Display Auto-return Time
This function automatically returns the display to the operation level’s
current value if no keys are pressed for a preset time (called the dis-
play auto-return time).
Move-to-Protect-Level Time
The time required to shift to the protect level can be set as desired.
Forced-zero Function
It is possible to shift from a value to the zero point with one touch of
the Up Key on the front panel (for example, when adjusting reference
values).
Note:
Used only for releasing the forced-zero with the Protect menu.
MAX/MIN Display
The maximum and minimum measurement (display) values from the
time the power is turned ON until the current time can be stored and
displayed. This is useful, for example, when measuring the maximum
value.
Parameter
Setting value
Meaning
init
off
---
on
Initializes all parame-
ters.
Parameter
Setting value
Meaning
=-lim
off
OFF: No zero-limit
on
ON: Zero-limit
lim-p
0
to
99
0 to 99: Zero-limit value
Upper limit (hi
g
h actin
g
)
Set
v
al
u
e
Meas
u
rement
v
al
u
e
Hysteresis
O
u
tp
u
t
O
N
OFF
Display
Zero-limit
setting
v
al
u
e
Inp
u
t
8.781
100.05
113.36
OUT1
v
al
u
e
OUT2
v
al
u
e
Green
Red
Red
UP
MAX/MIN
LEVEL
MODE
SHIFT
C
u
rrent
v
al
u
e
MAX
v
al
u
e
MI
N
v
al
u
e
MAX/MI
N
MAX/MI
N
MAX/MI
N
Max
Min
MAX/MIN
LEVEL
MODE
SHIFT
UP
MAX/MIN
LEVEL
MODE
SHIFT
UP
MAX/MIN
LEVEL
MODE
SHIFT
UP
