K3HB-C
14
Main Functions
■
Main Functions and Features
Measurement
The K3HB-R has the following six functions for receiving and
displaying input pulses.
F1: Rotation (rpm)/circumferential speed
F2: Absolute ratio
F3: Error ratio
F4: Rotational difference
F5: Flow rate ratio
F6: Passing time
The K3HB-P has the following six functions for receiving and
displaying input pulses.
F1: Passing speed
F2: Cycle
F3: Time difference
F4: Time band
F5: Measuring length
F6: Interval
The K3HB-C has the following three functions for receiving and
displaying input pulses.
F1: Individual inputs
F2: Phase differential inputs
F3: Pulse counting input
Filters
Specify the types of sensor connected to input A and input B.
Compensation
The display can be changed to a preset compensation value using
the compensation input.
Key Operations
The present measurement value can be used as a scaling value.
Key protection restricts level or parameter changes using the keys to
prevent unintentional key operations and malfunctions.
Outputs
Zone and level comparative output patterns can be selected for
comparative outputs.
Delays turning OFF comparatives for a set period. This can be used
to provide sufficient time to read the comparative output ON status
when the comparative result changes at short intervals.
Turns ON the comparative output for a specific time.
Reverses the output logic of comparative results.
Output operation can be checked without using actual input signals
by using the keys to set a test measurement value.
A current or voltage proportional to the change in the measurement
value can be output.
The comparison outputs can be kept OFF until the measurement
value enters the PASS range.
Function
func
Input Types
in-ta
,
in-tb
,
in-ta
Compensation
compn
,
com-p
Teaching
Key Protection
Comparative Output Pattern
out-p
Output OFF Delay
off-d
Shot Output
shot
Output Logic
out-n
Output Test
test
Linear Outputs
lset.c
,
lset.v
,
lset.h
,
lset.l
Standby Sequence
stdby
