manualshive.com logo in svg

Omron HEM-9210T, Instruction Manual

Share
Download
Omron HEM-9210T Instruction Manual Download Page 26

26

Connection failure. / 

Data is not being transmitted.

The blood pressure monitor might not 

be properly placed within the receiver’s 

transmission range and is too far from 

the receiver. If there are no causes of 

data transmission interference found 

near the blood pressure monitor, move 

the blood pressure monitor within 5 m 

(16 ft.) of the receiver and try again.

The 

Bluetooth

 feature on the receiver 

is turned off. Turn on the 

Bluetooth

 

feature on the receiver. To retry 

connecting the Telehealth service 

receiver, remove batteries and press 

[START/STOP] button for 2-3 times. 

Then reinstall batteries.

The blood pressure monitor did not 

pair successfully to the receiver. Try to 

pair the devices again. 

Refer to chapter 2.

The application on the receiver or 

destination device is not ready. Check 

the application then try to transmit the 

readings again. 

Refer to chapter 2. If the “Err” symbol 

is on the screen after checking the 

application, contact your Telehealth 

service provider.

Problem

Cause and Solution

®

®

Summary of Contents for HEM-9210T













































Reviews:

No comments

Brands by name

Popular brands

Load more brands