Appendix
26
Measuring Methods and Measuring Results
To next page
Cause
Correction
Problem
■
Troubleshooting
Wait until "0.0 kg" is displayed before
stepping onto the unit.
You stepped onto the unit before
"0.0 kg" was displayed.
"0.0 kg" is displayed even when
you step onto the unit, or the
weight value barely increases.
The value of body weight is
displayed abnormally high or low.
The value of body weight is
displayed high
Wait until "0.0 kg" is displayed before
taking out display unit.
Display unit is taken out before
"0.0 kg" is displayed.
Measurement results is
abnormally high or low
Measurement results achieved
each time is great different from
each other
Is the unit placed on a carpet or
other soft flooring?
Is the floor surface is uneven?
Place the unit on a hard and level
floor.
The soles of your feet, or whole
body are cold, causing poor blood
circulation.
Warm yourself up, and then take a
measurement once you feel your
circulation is back to normal.
Take a measurement with correct posture
(
Page 18~19)
Measuring posture is incorrect
Palms and soles are too dry.
Slightly moisten your palms and
soles with a damp towel and try
again.
The electrodes are extremely
cold.
Place the unit in a warm room for
a few minutes, and then take a
measurement when the electrodes
no longer feel cold.
Refer to "Things to Take Note" of Appendix (
Page 40)
Care and Maintenance
Bef
ore Measuring (v
arious settings)
Fore
w
or
d
Nothing is displayed when the
power is turned on.
Batteries are not inserted.
Insert the batteries.
(
Page 9)
The polarities of batteries are not
aligned correctly.
Insert the batteries in correct alignment.
(
Page 9)
The batteries are worn out.
Replace all four batteries with new ones.
(
Page 9)
Cord connecting the main unit
and the display unit is damaged.
Consult OMRON authorised dealer if
problem persists.
"
" is displayed for some
of the results.
The set values or the body
composition values exceed the
measurement range
Confirm whether the date of birth,
gender and height are set correctly
This unit cannot measure body
composition because of its
measurement range, even if the
setting are correct.
Please confirm the measurement
range
(
Page 6)
Error Displays
