No.14S002-08
9/53
STC-SBE132POE / STC-SCE132POE
Product Specifications and User’s Guide
4 Specifications
4.1
Electronic Specifications
Model Number
STC-SBE132POE
STC-SCE132POE
Image Sensor
1/1.8” 1.3M Progressive Monochrome CMOS
(e2V: EV76C560)
1/1.8” 1.3M Progressive Color CMOS
(e2V: EV76C560)
Shutter Type
Global / Rolling Shutter
Active Picture Elements
1,280 (H) x 1,024 (V)
Cell Size
5.3 (H) x 5.3 (V) µm
Sync Method
External trigger (Hardware / Software) /
Free run
Maximum
Frame Rate
(at Full
scanning)
8bits output
61 fps
10bits output
31 fps
10bits Packed output
42 fps
RGB8 Packed output
N/A
21 fps
Image Output Format
Mono8
/ Mono10 / Mono10Packed
Mono8 / Mono10 / Mono10Packed /
BayerRG8
/ BayerRG10 /
BayerRG10Packed / RGB8Packed
Noise Level
8bits output
Less than 3 digits (Gain 0 dB)
10bits / 10bits Packed output
Less than 12 digits (Gain 0 dB)
Minimum Scene Illumination
0.6
Lux at F1.2 (Gain Max)
50 Lux at F1.2 (Gain Max)
Exposure
8bits output
10 µseconds to 1,000 seconds
(Default: 16,379 µseconds)
Time
10bits / 10bits Packed output
RGB8 Packed output
Gain
Analog
0 to 5.38 dB
(Default: 0)
Digital
0 to 9.51 dB
(Default: 0)
ROI
Horizontal: 32 to 1,280 pixels / Vertical: 32 to 1,024 lines
(Default: 1,280 x 1,024)
Adjustable steps for image size: 8 pixels in horizontal direction / 2 lines in vertical direction
Adjustable steps for offset: 8 pixels in horizontal direction / 2 lines in vertical direction
Multi ROIs
N/A
Gamma
Gamma 1.0
or uploadable gamma table
Binning
Horizontal: 1/2, Vertical: 1/2 /
Off
Decimation
Horizontal: 1/2, Vertical 1/2 / Horizontal 1/4, Vertical: 1/4 /
Off
Flip Image
Horizontal / Vertical / Horizontal and vertical /
Off
Horizontal /
Off
Pixel Blemish Correction
Up to 64 points (
Default: ON)
Auto Image
Control
Auto Exposure
Support
Support
Auto Gain (AGC)
Support
Support
Auto White Balance
N/A
Support
Operational Mode
Edge Preset Trigger /
Free run
Communication
UART communication through Ethernet port
Protocol
IEEE802.3 (1000BASE-T)
Communication
GigE Vision 1.2, GenICam 1.4
I/O
One opt-isolated inputs and two open collector outputs (+3.3V)
Power
Input Voltage
+10.8 to +26.4 Vdc (IO Connector)
or Power Over Ethernet (IEEE802.3af compliance)
Power Consumption
12V: Less than 3.1 W / PoE: Less than 2.8 W
Default:
Bold
Aegis Electronic Group, Inc.
For more information please contact Aegis Electronic Group, Inc. *(888)687-6877 *[email protected] *http://www.aegiselect.com
