Omron FQ2 Series, User Manual

Page: 148 / 516

Inspecting with the Labeling Inspection Item
146
FQ2 User’s Manual
4-12 Inspecting with the Labeling Inspection Item
Labeling
One region of the color you want to measure is counted as a Label. You can sort these labels by position or
size, and assign numbers to them. You can then output the total number of labels, and size and position of a
desired label.
Setup Procedure for Labeling Inspection Item
Step 1 Selecting the Inspection Item
[Inspect]
−
[Inspection]
If a Sensor with Color Camera is connected, you can specify up to four colors to measure. If a Sensor with Mono-
chrome Camera is connected, the image is converted to a black and white binary image. Then, white pixels are
measured.
1
Press an unused inspection item number and press
[Add item.].
2
Press [Labeling].
Registering Inspection Items: p. 93
Drag the arrow at the bottom of the menu upward to display all of the inspection items.
Color information is extracted
from the meas
u rement o b ject.
Meas u rement region
La b el n u m b ers w hen sorted b y area
La b el 0
La b el 1
La b el 2
Sample Settings Sample Meas u rement
Regions of the extracted color are detected as la b els.
Total n u m b er of detected la b els: 3
Note
Note