F3SH-A
Multi-beam Safety Sensor
max.10m
300mm
600mm
900mm
1200mm
Lowest beam
Floor surface
Independent stand
Setting example based on recommended
Multi-beam Safety Sensor dimensions under EN999.
Highest beam
A person cannot go
over undetected.
A person cannot pass
through undetected.
A person cannot pass
through undetected.
Space between
beams
8
The F3SH-A enables human body detection using the 4-beam
dimensions recommended by EN Standards.
300-mm gap using 4 beams. Detects whole-body intrusion.
The EN999 Standard concerns machine safety, in particular the positioning of protective devices in
relation to the approach speed of part of a human body. The values in the table indicate the heights from
the reference surface (such as the floor) for each beam of a 4-optical-beam Sensor recommended as
most effective under EN999. The F3SH-A Beam gap matches the recommended dimensions and can,
therefore, detect intrusion under the lowest beam or over the
highest beam, for settings shown in the following diagram.
No. of beams
4
Height from basic surface, such as floor (in mm)
300,600,900,1200
