![background image](http://html1.mh-extra.com/html/omron/f160-2-2/f160-2-2_manual_741260050.webp)
33
Connecting through the Parallel Interface
Section 4-1
Note
1.
Use the STGOUT0 or STGOUT1 signal when you want to connect a strobe
device to the F160.
SeeAlso
For details, refer to page 61.
2.
Pins A8 to A11 and B9 to B10 are for control signals.
Precaution
Do not input the RESET input immediately after turning ON the power. When
using RESET input to synchronize startup timing, wait at least 1 s after turning
ON the F160's power supply before turning ON the RESET signal.
CHECK
Use a DC power supply with countermeasures against high voltages (safe
extra low-voltage circuits on the secondary side) for the COMIN terminal. If the
system must meet UL standards, use a UL class II power supply.
Making a Parallel I/O Cable
A parallel I/O cable can be assembled using the connector and cover listed in
the following table or equivalent components. Keep the cable length less than
30 m.
CHECK
Double-check the connector wiring for mistakes before turning ON the power
supply for the first time.
4-1-3
I/O Specifications
Input Specifications
B8
STGOUT1
Green
■■
(red)
Strobe trigger 1 output
(See note 1.)
B9
ERROR
Gray
■■
(red)
ON when an error occurred.
B10
GATE
White
■■
(red)
ON for the set output time.
B11
COMOUT1
Light brown
■■■
(red)
Common for control signals
(See note 2.)
B12
DO1
Yellow
■■■
(red)
Data output
B13
DO3
Green
■■■
(red)
B14
DO5
Gray
■■■
(red)
B15
DO7
White
■■■
(red)
B16
COMOUT2
Light brown
■■■■
(red)
Common for DO0 to DO7
B17
DO10
Yellow
■■■■
(red)
Data output
B18
DO12
Green
■■■■
(red)
B19
DO14
Gray
■■■■
(red)
B20
COMOUT3
White
■■■■
(red)
Common for DO8 to DO15
Pin
Signal
Wire color
Marking
Function
Component
Manufacturer
Model number
Connector
Fujitsu
FCN-361J040-AU
Cover
Fujitsu
FCN-360C040-B
Item
Specification
Model
F160-C10E (NPN mode)
F160-C15E (PNP mode)
Input voltage
12 to 24 VDC
±
10%
ON current (See note 1.)
5 to 15 mA
ON voltage (See note 1.)
8.8 V max.
OFF current(See note 2.)
0.1 mA max.
OFF voltage(See note 2.)
4.5 V min.
ON delay
RESET input: 10 ms max.
Other inputs: 0.5 ms max.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Summary of Contents for F160-2 - 2
