3. Using the Unit
16
3.2
Using the Memory Function
This unit automatically stores the last 25 measurement results (excluding Hi/Lo results).
Note:
• If the memory is full, the unit will delete the oldest reading.
• When the unit is switched between “°F” and “°C”, all the readings stored in the memory are deleted.
1.
Press the [ON/MEM] button.
2.
Press the [ON/MEM] button again.
The memory number appears on the display.
3.
Release the [ON/MEM] button.
The most recent result appears on the display.
Press the [ON/MEM] button repeatedly to view the older results.
4.
Press and hold the [ON/MEM] button until “OFF” appears on the display.
“OFF” appears on the display, and then the room temperature appears on it.