1
CSM_E63-WF_DS_E_4_3
Direct Discrimination Unit
E63-WF
Detects the Rotary Encoder Direction
• Input phase difference signal from the Encoder to detect the
direction of rotation.
• High-speed response at 120 kHz.
• Mounts to DIN Track. Thin design enables superb mounting
efficiency.
• Front-panel switch enables reversing phase Z logic. Enables
connecting either voltage outputs or open-collector outputs.
Be sure to read
Safety Precautions
on
page 3.
Ordering Information
Ratings and Specifications
Direct Discrimination Unit
[Refer to
Dimensions
on page 4.]
Power supply voltage
Output configuration
Model
12 to 24 VDC
Open-collector output
E63-WF5C
Item
Model
E63-WF5C
Power supply voltage
12 VDC
−
10% to 24 VDC +15%, ripple (p-p): 5% max.
Current consumption
50 mA max.
Input
Input signal
Phases A, B, and Z (phase difference signals)
Phase difference
90
°
±
45
°
max.
ON
6 mA max. at 0 to 2 V
OFF
1.5 mA max. at 8 to 24 V
Input short current
9 mA
Max. applied voltage
30 V max.
Input impedance
Approx. 1
Ω
Output
Output signal
UP/DOWN (direction detection), COUNTS output (count), OUT Z
Output configuration
Open-collector output
Output capacity
Applied voltage: 30 VDC max.
Sink current: 80 mA max.
Residual voltage: 1 V max. (at sink current of 80 mA)
Residual voltage: 0.4 V max. (at sink current of 20 mA)
Maximum response
frequency
120 kHz
Output response time
2
μ
s max.
Indicators
Power indicator (red), Phase Z output indicator (green)
Ambient temperature range
Operating:
−
10 to 55
°
C (with no icing), Storage:
−
25 to 80
°
C (with no icing)
Ambient humidity range
Operating/Storage: 35% to 85% (with no condensation)
Vibration resistance
Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance
Destruction: 300 m/s
2
3 times each in X, Y, and Z directions
Connection method
Terminal block
Material
Case: ABS
Weight (packed state)
Approx. 100 g
Accessories
Instruction manual (S3D8 Connector is not provided.)
