E5ZE-8
j
-E
E5ZE-8
j
-E
218
Nomenclature
5. Bank number display
4. Point (channel) number display
3. Unit number display
6. Shift indicator
7. Run indicator
8. Auto-tuning (AT) indicator
12. Shift Key
13. Unit/Point Key
1. PV display
2. SV display
11. Alarm 2 indicator
9. Heater burnout/Heater short circuit
(HB/HS) indicator
17. Enter Key
16. Up Key
15. Down Key
14. Bank/Display Key
10. Alarm 1 indicator
Display Unit E5ZD-SDL1
Display
No.
Display
Meaning
1
Process Value (PV) display
The measured temperature and the set item characters are displayed accord-
ing to the display mode.
An error message is displayed if the system has an error.
is displayed for the leftmost digit of a figure between –1,000 and –1,999.
2
Set Value (SV) display
The value that has been set is displayed according to the display mode.
An error message is displayed if the system has an error.
is displayed for the leftmost digit of a figure between –1,000 and –1,999.
3
Unit number display
The unit number that has been selected is displayed.
4
Point number display
The point number that has been selected is displayed.
5
Bank number display
The bank number that has been selected is displayed.
6
Shift indicator
Lit at the time of key shift.
7
Run indicator
Lit when the displayed unit is being controlled.
8
Auto-tuning (AT) indicator
Flashes while auto-tuning is being executed.
9
Heater burnout/Heater short circuit (HB/
HS) alarm indicator
Lit when heater burnout or heater short circuit alarm output is ON.
10
Alarm 1 indicator
Lit when alarm output 1 is ON.
11
Alarm 2 indicator
Lit when alarm output 2 is ON.
Key
No.
Key
Meaning
12
Shift Key
Turns ON or OFF the shift indicator.
13
Unit/Point Key
Displays the next point number while the shift display is OFF. Any invalid point
is skipped.
Displays the next unit number while the shift display is ON.
a
,
b
,
c
,
d
,
e
, and
f
are displayed for the 10th unit number and the succeeding unit numbers.
0
1
2
3
...
Maximum point
: All points
: All units
3
0
1
2
...
Maximum unit
14
Bank/Display Key
Displays the next display mode while the shift display is OFF.
Displays the next bank number when the shift display is lit.
0
1
2
3
4
5
6
7
: All banks
15
Down Key
Decreases the set value within the available setting range. The set value de-
creases continuously if this key is pressed for 0.5 s or more.
Note: This key does not function if the key protect switch is turned ON.
16
Up Key
Increases the set value within the available setting range. The set value in-
creases continuously if this key is pressed for 0.5 s or more.
Note: This key does not function if the key protect switch is turned ON.
17
Enter Key
Writes the set value to the E5ZE Temperature Controller.
Note: This key does not function if the key protect switch is turned ON.
