Omron E3X-NA -, Manual

Page: 20 / 28

20
E3X-NA E3X-NA
*
1
Teflon is a registered trademark of the Dupont Company and the Mitsui Dupont Chemical Company for their fluoride resin.
*
2
For continuous operation, use the products within a temperature range of
−
40
°
C to 130
°
C.
*
3
Indicates the heat-resistant temperature at the fiber tip.
*4 These figures are for a sensing distance of 100 mm. (Diameters of sensing targets are ones at a stationary state.)
Note: 1. The size of standard sensing target is the same as the fiber core diameter (lens diameter for models with lens).
2. The values of the minimum sensing target for E3X-NA @ (V) and E3X-NAG @ through-beam models indicate those obtained
where the sensing distance and sensitivity are set to optimum values.
3. The value of the minimum sensing target for E3X-NA @ F through-beam models indicates that obtained at the rated sensing dis-
tance with the sensitivity set to the optimum value.
Area sensing Multi-point detection
(4-head) E3X-NA @ (V) 2.0-mm dia.
(0.03-mm dia.) E32-M21 25 mm
E3X-NA @ F 2.0-mm dia.
(0.3-mm dia.)
Detects in a
30-mm area E3X-NA @ (V) (0.5-mm dia.)
*4 10 mm
E3X-NAG @
E3X-NA @ F (4.0-mm dia.)
*4
Detects in
a
30-mm
area; flexible E3X-NA @ (V) (0.5-mm dia.)
*4 1 mm
E3X-NA @ F (4.0-mm dia.)
*4
Side-view;
suitable for
applica-
tions with limited
spatial depth
E3X-NA @ (V) (0.3-mm dia.)
*4 10 mm
E3X-NAG @
E3X-NA @ F (2.0-mm dia.)
*4
Side-view;
suitable for
applications
with limited spatial depth;
flexible E3X-NA
@
(V) (0.3-mm dia.)
*4 1 mm
E3X-NA @ F (2.0-mm dia.)
*4
Suitable for
detecting
over a
10-mm area;
long distance E3X-NA @ (V) (0.9-mm dia.)
*4 25 mm
E3X-NAG @
E3X-NA @ F (1.5-mm dia.)
*4
Stable for
detecting
minute
sensing targets in a
wide area; enclosure
rating: IEC 60529 IP50 E3X-NA @ (V) (0.3-mm dia.)
*4 10 mm
E3X-NAG @
E3X-NA @ F (2.0-mm dia.)
*4
Stable for
detecting
minute
objects in a wide area;
flexible; enclosure rating:
IEC60529 IP50
E3X-NA @ (V) (0.3-mm dia.)
*4 1 mm
E3X-NA @ F (2.0-mm dia.)
*4
Application Features Appearance Applicable
Amplifier Unit Sensing distance (mm)
(Values in parentheses: when
using the E39-F1 Lens Unit) Standard object
(see notes)
(min. sensing
target: opaque) Part
number Permissible
bending
radius
M3 screw
300
90
Free-cut
30 mm
920
E32-T16W
170
270
Free-cut
30 mm
690
E32-T16WR
200
Free-cut
11 mm
520 E32-T16J
95
150
Free-cut
11 mm
390
E32-T16JR
110
Free-cut
10 mm
1,500 E32-T16
275
450
Free-cut
11 mm
600
E32-T16P
110
180
Free-cut
11 mm
450
E32-T16PR
130
Downloaded from Elcodis.com electronic components distributor