A-146
Standard Photoelectric Sensors
Ordering Information
* Using 80 x 80 mm white art paper
Rating/performance
Sensor type
Shape
Connection method
Detection distance *
Timer
function
Model
Output
Limited reflective
Pre-wired (2 m)
Without
E3S-LS3N
NPN
Light ON
E3S-LS3NW
Pre-wired (2 m)
Without
E3S-LS3P
PNP
Light ON
With
E3S-LS3PT
Pre-wired M8
3-pin connector (0.3 m)
Without
E3S-LS3P-M5J
With
E3S-LS3PT-M5J
Pre-wired M8
4-pin connector (0.3 m)
Without
E3S-LS3P-M3J
With
E3S-LS3PT-M3J
Pre-wired (2 m)
Without
E3S-LS3PW
With
E3S-LS3PWT
Pre-wired M8
3-pin connector (0.3 m)
Without
E3S-LS3PW-M5J
With
E3S-LS3PWT-M5J
Pre-wired M8
4-pin connector (0.3 m)
Without
E3S-LS3PW-M3J
With
E3S-LS3PWT-M3J
Sensor type
Limited reflective
Item
Model
E3S-LS3
@
E3S-LS3PT
E3S-LS3
@
W
E3S-LS3PWT
Sensing
White art paper 20 to 35 mm
10 to 60 mm
Black paper *
20 to 30 mm
15 to 50 mm
Light source (wave length)
Red LED (660 nm)
Power supply voltage
12 to 24 VDC
±
10%, ripple (p-p) 10% max.
Current consumption
25 mA max.
Control output
Load power supply voltage: 24 VDC max.; Load current: 100 mA max.,
Residual voltage: 2 V max.; Operating mode: Light ON
Response time
1 ms max. for operation and reset respectively
Timer function
Available with E3S-LS3P(W)T models only. Time range: 0.1 to 1.0 s (adjustable)
Ambient illuminance
Receiver side: Incandescent lamp: 5,000 lux max.
Ambient temperature
Operating:
−
10 to 55
°
C (with no icing or condensation)
Ambient humidity
Operating:35% to 85% (with no condensation)
Insulation resistance
20 M
Ω
min. (at 500 VDC) between charged parts and the case
Dielectric strength
1,000 VAC at 50/60 Hz for 1 minute between charged parts and the case
Vibration resistance
10 to 55 Hz with a 1.5-mm double amplitude for 2 hrs each in X, Y and Z directions
Shock resistance
500 m/s
2
, 3 times each in X, Y and Z directions
Protective structure
IEC60529 IP40
Connection method
Pre-wired (standard length: 2 m)/Pre-wired M8 connector (standard length: 0.3 m)
Indicators
Operation indicator (orange)
Weight (Packed state)
Pre-wired models: Approx. 80 g; Pre-wired M8 connector: Approx. 45 g
Material
Case
ABS
Lens
Acrylic
Accessories
Instruction sheet, M3
screws,
Red light
20 to 35 mm
10 to 60 mm
20 to 35 mm
10 to 60 mm
F502-EN2-04.book Seite 146 Dienstag, 26. Juli 2005 5:48 17
