background image

1

E3F2-

@

Z

Cylindrical M18 photoelectric sensor for AC power supply 

E3F2-

@

Z

• 24 to 240 VAC power supply
• UL and CSA approved

Selection Guide

Housing material: Plastic

Note: Standard cable length is 2 m. Models provided with a 5 m long cable are available. When ordering, specify the cable length by adding the length of the cable 

(e.g. E3F2-R2Z1 2M or E3F2-R2Z1 5M). For other cable length please contact your OMRON sales representative.

Ordering Information: type list

* Standard cable length is 2 m. Models provided with a 5 m long cable are available. When ordering, specify the cable length by adding the length of the cable 

(e.g. E3F2-R2Z1 2M or E3F2-R2Z1 5M). For other cable length please contact your OMRON sales representative.

Sensing method

Appearance

Connection

Sensing

Model

method

distance

Light-ON

Dark-ON

Through-
beam

pre-wired

3 m

E3F2-3Z1

E3F2-3Z2

axial

Retro-
reflective

Non-polarizing
(without MSR function)

 
 
 

axial

pre-wired

0.1 - 2 m

(with

reflector

E39-R1)

E3F2-R2Z1-E

E3F2-R2Z2-E

Diffuse 
reflective

Fixed sensing distance
Wide-beam characteristics

 
 
 

axial

pre-wired

0.1 m

E3F2-DS10Z1-N

E3F2-DS10Z2-N

Model

Sensing method,
sensing range 

Appearance

Connection
(cable-length)

Control
output

Comments

E3F2-3LZ 2M

Through-beam, 3 m

axial

Pre-wired (2 m)* N.A.

Emitter only

E3F2-3DZ1 2M

Through-beam, 3 m

axial

Pre-wired (2 m)* Light-ON

Receiver only

E3F2-3DZ2 2M

Through-beam, 3 m

axial

Pre-wired (2 m)* Dark-ON

Receiver only

E3F2-3Z1 2M

Through-beam, 3 m

axial

Pre-wired (2 m)* Light-ON

Receiver and Emitter

E3F2-3Z2 2M

Through-beam, 3 m

axial

Pre-wired (2 m)* Dark-ON

Receiver and Emitter

E3F2-R2Z1 2M

Retroreflective, 2 m

axial

Pre-wired (2 m)* Light-ON

Non-polarizing, incl. E39-R1

E3F2-R2Z2 2M

Retroreflective, 2 m

axial

Pre-wired (2 m)* Dark-ON

Non-polarizing, incl. E39-R1

E3F2-R2Z1-E 2M 

Retroreflective, 2 m

axial

Pre-wired (2 m)* Light-ON

Non-polarizing, including reflector

E3F2-R2Z2-E 2M 

Retroreflective, 2 m

axial

Pre-wired (2 m)* Dark-ON

Non-polarizing, including reflector

E3F2-DS10Z1-N 2M

Diffuse reflective, 0.1 m

axial

Pre-wired (2 m)* Light-ON

Wide-beam characteristic

E3F2-DS10Z2-N 2M

Diffuse reflective, 0.1 m

axial

Pre-wired (2 m)* Dark-ON

Wide-beam characteristic

Summary of Contents for E3F2-Z

Page 1: ... E3F2 R2Z2 E Diffuse reflective Fixed sensing distance Wide beam characteristics axial pre wired 0 1 m E3F2 DS10Z1 N E3F2 DS10Z2 N Model Sensing method sensing range Appearance Connection cable length Control output Comments E3F2 3LZ 2M Through beam 3 m axial Pre wired 2 m N A Emitter only E3F2 3DZ1 2M Through beam 3 m axial Pre wired 2 m Light ON Receiver only E3F2 3DZ2 2M Through beam 3 m axial ...

Page 2: ...Incandescent lamp 3000 lx max Sunlight 10000 lx max Ambient temperature 3 3 Operating 25 to 55 C Storage 30 to 70 C with no icing or condensation Ambient humidity Operating 35 to 85 Storage 35 to 95 without condensation Insulation resistance 20 M min at 500 V DC between energized parts and case Dielectric strength 1500 VAC 50 60 Hz for 1 min between energized parts and case Vibration resistance 10...

Page 3: ... X m typical sensing distance 3 8 m X Y 1 2 3 4 5 6 0 0 100 200 300 100 200 300 Distance Y mm Distance X m 8 7 typical sensing distances E39 R1 3 4 m E39 R7 3 9 m E39 R8 5 2 m X Y Reflector 20 40 60 80 100 120 0 0 10 20 30 10 20 30 Distance Y mm Distance X mm 140 white paper 50 x 50 mm X Y Object 1 2 3 4 5 6 0 100 10 1 0 1 Excess gain Distance X m 7 1 2 3 4 5 6 0 100 10 1 0 1 Excess gain Distance ...

Page 4: ...ines the photo electric sensor could be induced to malfunction or even be damaged by electrical noise Separate the wiring or use shielded lines as input output lines to the photoelectric sensor Do not connect the black wire to the brown wire without a load Direct connection of these wires may damage the photoelectric sensor AC switching type When using the photoelectric sensor in the vicinity of a...

Reviews: