![background image](http://html1.mh-extra.com/html/omron/e39-l104/e39-l104_manual_740994005.webp)
5
E3Z Laser Models
Ratings and Specifications
Sensing
method
Through-beam
Retro-reflective with
MSR function
Distance-settable (BGS models)
Response
Standard response
High-speed response
Model
NPN output
E3Z-LT61/-LT66
E3Z-LR61/-LR66
E3Z-LL61/-LL66
E3Z-LL63/-LL68
Item
PNP output
E3Z-LT81/-LT86
E3Z-LR81/-LR86
E3Z-LL81/-LL86
E3Z-LL83/-LL88
Sensing distance
60 m *1
0.3 to 15 m
(when using E39-R1)
0.2 to 7 m
(when using E39-R12)
0.2 to 7 m
(when using E39-R6)
White paper
(100
×
100 mm):
20 to 300 mm
Black paper
(100
×
100 mm):
20 to 160 mm
White paper
(100
×
100 mm):
25 to 300 mm
Black paper
(100
×
100 mm):
25 to 100 mm
Set distance range
---
White paper
(100
×
100 mm):
40 to 300 mm
Black paper
(100
×
100 mm):
40 to 160 mm
White paper
(100
×
100 mm):
40 to 300 mm
Black paper
(100
×
100 mm):
40 to 100 mm
Spot diameter (typical)
5 mm dia. at 3 m
0.5 mm dia. at 300 mm
Standard sensing object
Opaque:
12 mm dia. min.
Opaque:
75 mm dia. min.
---
Minimum detectable
object (typical)
6 mm dia. opaque object at 3 m
0.2 mm dia. stainless-steel pin gauge at 300 mm
Differential travel
---
5% max. of set distance
Black/white error
---
5% at 160 mm
5% at 100 mm
Directional angle
Receiver: 3 to 15
°
---
Light source (wavelength)
Red LED (655 nm), JIS CLass 1, IEC Class 1, FDA Class II
Power supply voltage
12 to 24 VDC
±
10%, ripple (p-p): 10% max.
Current consumption
Emitter: 15 mA
Receiver: 20 mA
30 mA max.
Control output
Load power supply voltage: 26.4 VDC max., Load current: 100 mA max., Open collector output
Residual output voltage
Load current of less than 10 mA: 1 V max.
Load current of 10 to 100 mA: 2 V max.
Output mode switching
Switch to change between light-ON and dark-ON
Protection circuits
Reversed power supply
polarity protection,
Output short-circuit pro-
tection, and Reversed
output polarity protection
Reversed power supply polarity protection, Output short-circuit protection,
Mutual interference prevention, and Reversed output polarity protection
Response time
Operate or reset: 1 ms max.
Operate or reset:
0.5 ms max.
Sensitivity adjustment
One-turn adjuster
Five-turn endless adjuster
Ambient illumination
(Receiver side)
Incandescent lamp: 3,000 lx max.
Sunlight: 10,000 lx max.
Ambient temperature range
Operating:
−
10 to 55
°
C, Storage:
−
25 to 70
°
C (with no icing or condensation)
Ambient humidity range
Operating: 35% to 85%, Storage: 35% to 95% (with no icing or condensation)
Insulation resistance
20 M
Ω
min. at 500 VDC
Dielectric strength
1,000 VAC, 50/60 Hz for 1 min
Vibration resistance
Destruction: 10 to 55 Hz, 1.5 mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance
Destruction: 500 m/s
2
3 times each in X, Y, and Z directions
Degree of protection
IP67 (IEC 60529)
Connection method
Pre-wired cable (standard length: 2 m): E3Z-L
@@
1/-L
@@
3
Standard M8 Connector: E3Z-L
@@
6/-L
@@
8
Indicator
Operation indicator (orange)
Stability indicator (green)
Emitter for Through-bream Models has power indicator (orange) only.
Summary of Contents for E39-L104
Page 17: ...17 E3Z Laser Models...
Page 18: ...18 Laser Photoelectric Sensor with Built in Amplifier...
Page 19: ...19 E3Z Laser Models...