D-166
Inductive Sensors
Mounting Holes
E2EZ-X8C1
E2EZ-X8Y1
M30 x 1.5
Two toothed lock washer
Two tightening nuts
(see note 1)
Indicator (see note 2)
5
5
42 dia.
36
60
80
2. B, C Type: Detection indicator (red)
Y Type: Operation indicator (red)
Note:
1. E2EZ-X8B1 and E2EZ-X8CI:
A 6 dia., 3-conductor, vinyl-insulated round cable (conductor cross-sectional
area: 0.5 mm
2
; insulation diameter: 1.9 mm) is used.
Standard length: 2 m
E2EZ-X8Y1
A 6 dia., 2-conductor, vinyl-insulated round cable (conductor cross-sectional
area: 0.5 mm
2
; insulation diameter: 1.9 mm) is used.
Standard length: 2 m
E2EZ-X4D
@
-N
M18 x 1
Indicator (see note 2)
Two, clamping nuts
Toothed washer
(see note 1)
29 dia.
24
4
38
10
12
43
Note:
A 6 dia., 2-conductor, vinyl-insulated round cable (conductor cross-sectional area: 0.5 mm
2
; insulation
diameter: 1.9 mm) is used.
Standard length: 2m
Cable extension (through a single metal conduit): 200 m max.
2. D1 type: Operation indicator (red);
Operation set indicator (green)
D2 type: Operation indicator (red)
Connector relay type (-M1J/M1GJ)
M12 x 1
16 dia.
Vinyl-insulated round cable of 6 dia. 2 cores conductor
cross-sectional area: 0.5 mm
2
; insulation diameter: 1.9 mm)
Standard length: 300 mm
E2EZ-X8D
@
-N
M30 x 1.5
Indicator (see note 2)
Two, clamping nuts
Toothed washer
(see note 1)
42 dia.
36
5
43
10
12
48
Note:
A 6 dia., 2-conductor, vinyl-insulated round cable (conductor cross-sectional area: 0.5
mm
2
; insulation diameter: 1.9 mm) is used.
Standard length: 2m
Cable extension (through a single metal conduit): 200 m max.
2. D1 type: Operation indicator (red);
Operation set indicator (green)
D2 type: Operation indicator (red)
Connector relay type(-M1J/M1GJ)
M12 x 1
16 dia.
Vinyl-insulated round cable of 6 dia. 2 cores conductor
cross-sectional area: 0.5 mm
2
; insulation diameter: 1.9 mm)
Standard length: 300 mm
F
Model
F (mm)
E2EZ-X4
@
18.5-mm dia.
E2EZ-X8
@
30.5-mm dia.
+0
+0
In the interest of product improvement, specifications are subject to change without notice.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Cat. No.
D028-E2-04-X
F502-EN2-04.book Seite 166 Dienstag, 26. Juli 2005 5:48 17
