D-159
E2AU
E2A
U
Precautions
Safety Precautions
Power Supply
Do not impose an excessive voltage on the E2AU, otherwise it may
be damaged. Do not impose AC current (100 to 240 VAC) on any DC
model, otherwise it may be damaged.
Load Short-circuit
Do not short-circuit the load, or the E2AU may be damaged.
The E2AU’s short-circuit protection function will be valid if the polarity
of the supply voltage imposed is correct and within the rated voltage
range.
Wiring
Be sure to wire the E2AU and load correctly, otherwise it may be
damaged.
Connection with No Load
Be sure to insert loads when wiring. Make sure to connect a proper
load to the E2AU in operation, otherwise it may damage internal ele-
ments.
Do not expose the product to flammable or explo-
sive gases.
Do not disassemble, repair, or modify the product.
Correct Use
Designing
Power Reset Time
The Proximity Sensor is ready to operate within 100 ms after power
is supplied. If power supplies are connected to the Proximity Sensor
and load respectively, be sure to supply power to the Proximity Sen-
sor before supplying power to the load.
Effects of Surrounding Metal
When mounting the E2AU within a metal panel, ensure that the
clearances given in the following table are maintained.
(Unit: mm)
Note 1.
In the case of using the supplied nuts.
If true flash mounting is necessary, apply a free zone of
1.5 mm.
2.
In the case of using the supplied nuts.
If true flush mounting is necessary, apply a free zone of
4 mm.
Power OFF
The Proximity Sensor may output a pulse signal when it is turned
OFF. Therefore, it is recommended that the load be turned OFF
before turning OFF the Proximity Sensor.
Power Supply Transformer
When using a DC power supply, make sure that the DC power sup-
ply has an insulated transformer. Do not use a DC power supply with
an auto-transformer.
Mutual Interference
When installing two or more Sensors face-to-face or side-by-side,
ensure that the minimum distances given in the following table are
maintained.
(Unit: mm)
Type
Dimension
M12
M18
M30
Short
barrel
Long
barrel
Shielded
l
0
0
(See note 1.)
0
(See note 2.)
m
12
24
45
d
---
27
45
D
0
1.5
4
n
18
27
45
Non-
shielded
l
15
22
30
40
m
20
48
70
90
d
40
70
90
120
D
15
22
30
40
n
40
70
90
120
l
m
n
m
D
d dia.
l
Type
Dimension
M12
M18
M30
Short
barrel
Long
barrel
Shielded
A
30
60
110
B
20
35
70
Non-shiel-
ded
A
120
200
300
300
B
100
120
200
300
D10E-EN-01+E2AU+Datasheet.fm Seite 159 Donnerstag, 12. Juni 2008 11:21 11